Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE Dubai, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Malaysia, Indonesia, Thailand, Korea, Japan, etc. Halal & Kosher certified Formaldehyde solution, Formic acid, Sodium formaldehyde bisulfite, Ammonium formate, Calcium formate, Chromium formate, Sodium formate etc Manufacturers made in a FDA-GMP plant is offered.
The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal and DMF support is available.

Home ---------- Contact Formaldehyde Solution

DrumsExporterSuppliersBulk Exporter Sodium formate manufacturers

Sodium Formate SDS MSDS Sheet of Manufacturers Suppliers Exporters

Manufacturers Specifications of Sodium Formate.

Sodium Formate SDS, Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet

1. Product Identification

Product Name/Synonyms: Sodium Formate, Formic acid sodium salt.
CAS No.: 141-53-7
EINECS EC Code: 205-488-0
Molecular Weight: 68.01
Chemical Formula: HCOONa

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Labeling according GHS USA & Regulation (EC) No 1272/2008

GHS Label Elements
None

Signal Words: -

Hazards not otherwise classified (HNOC) or not covered by GHS:
May cause mild skin irritation.
May causes mild eye irritation.
Heating may cause an explosion.
Hygroscopic.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

3. Composition/Information on Ingredients

Ingredient: Sodium Formate
CAS No.: 141-53-7
EINECS EC Code: 205-488-0

4. First Aid Measures

Inhalation: Remove to fresh air. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.
Skin Contact: After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cold water may be used. Cover the irritated skin with an emollient. If irritation persists, seek medical attention. Wash contaminated clothing & Shoes before reusing.
Eye Contact: Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Cold water may be used. Do not use an eye ointment. Seek medical attention.
Notes to Physician: Treat symptomatically

5. Fire Fighting Measures

Fire: Sodium Formate is not considered to be a fire hazard.
Explosion: Not considered to be an explosion hazard.
Specific Hazards Arising from the Chemical: Thermal decomposition can lead to release of irritating gases and vapors. Keep product and empty container away from heat and sources of ignition. Fine dust dispersed in air may ignite. Dust can form an explosive mixture in air.
Hazardous Combustion Products: Sodium oxides Carbon monoxide (CO) Carbon dioxide (CO2) and fumes.
Fire Extinguishing Media: Use any means suitable for extinguishing surrounding fire.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.

6. Accidental Release Measures

Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to legal requirements.
Large Spill: Use personal protective equipment. Ensure adequate ventilation. Avoid contact with skin, eyes and clothing. Avoid dust formation. Do not touch damaged packages or spilled material.Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to drain.

7. Handling and Storage

Keep Sodium Formate in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Containers of Sodium Formate may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits:This product does not contain any hazardous materials with occupational exposure limits established by the region specific regulatory bodies.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion into the work area.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Maintain eye wash fountain and quick-drench facilities in work area. Use chemical safety goggles and/or full face shield where dusting or splashing is possible.

9. Physical and Chemical Properties

Appearance: Sodium Formate is white, deliquescent, granules or crystalline powder.
Odor: Odorless to slight formic acid odor.
Solubility: 97 g/100 g water @ 20C (68F)
Relative Density: 1.92 @ 20C
pH: 7.0-8.5 , concentration: 1M at 20 C (solution)
% Volatiles by volume @ 21C (70F): 0.5
Boiling Point: Decomposes.
Melting Point: 253C (487F).
Molecular Weight: 68.01
Chemical Formula: HCOONa

10. Stability and Reactivity

Stability: Sodium Formate is hygroscopic. Readily absorbs moisture from the air. Solutions are strong bases.
Hazardous Decomposition Products: At higher temperatures, substance decomposes into sodium oxalate and hydrogen, then into sodium carbonate. Carbon dioxide and carbon monoxide may form when heated to decomposition.
Hazardous Polymerization: This substance does not polymerize.
Incompatibilities: Strong oxidizing agents, Strong acids. Reacts with strong acids to form formic acid fumes.
Conditions to Avoid: Incompatible products. Exposure to moist air or water. Avoid dust formation. Ignitions sources - heat, sparks and open flames.

11. Toxicological Information

Oral LD50 Mouse: 11200 mg/kg.
Carcinogenic Effects: Not a reported carcinogen by IARC NTP ACGIH OSHA.
Mutagenic Effects: No information available.
Reproductive Effects: No information available.
Developmental Effects: No information available.
Teratogenicity: No information available.

12. Ecological Information

Toxicity to fish: LC50 - Pimephales promelas (fathead minnow) - > 954 mg/l - 96 h
Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia magna (Water flea) - 1.070 mg/l - 48 h
Toxicity to algae: EC50 - Pseudokirchneriella subcapitata (green algae) - 790 mg/l - 96 h.
Persistence and Degradability: Soluble in water Persistence is unlikely based on information available.
Bioaccumulation/ Accumulation: No information available.
Mobility: Will likely be mobile in the environment due to its water solubility.
Results of PBT and vPvB assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused Sodium Formate in accordance with federal, state and local requirements.

14. Transport Information

DOT & ADR/IRD: Not regulated.
IMDG: Not regulated.
IATA: Not regulated.

15. Regulatory Information

US Regulations:
SARA 302: Sodium Formate (141-53-7) -- No
SARA 313: Sodium Formate (141-53-7) -- No
California Proposition 65: This product does not contain any Proposition 65 chemicals

Section 16 - Additional Information

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

Sodium Formate Manufacturers

Aadhunik Industries
Ankleshwar Gujarat &, Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.

e-mail: info@aadhunikindustries.com

India manufacturers exporters

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Vietnam, Holand, Norway, etc.

Copyright and Usual Disclaimer is Applicable