Aadhunik Industries is a manufacturing group company. Aadhunik Industries is pioneer manufacturers of Specialty Chemicals, Pharmaceutical Excipients, Food Fragrance & Flavor chemicals in India. It has toll manufacturers and representatives in UAE, Europe, Canada & USA and agents & customers in all countries like USA, Canada, Europe, UAE Dubai, Tanzania, Kenya, Egypt, Nigeria, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Malaysia, Indonesia, Thailand, Korea, Japan, etc. Halal & Kosher certified Formaldehyde solution, Formic acid, Sodium formaldehyde bisulfite, Ammonium formate, Calcium formate, Chromium formate, Sodium formate etc Manufacturers made in a FDA-GMP plant is offered.

The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal and DMF support is available.

----------

Sodium formaldehyde bisulfite or Sodium hydroxymethanesulphonate SDS MSDS Sheet of Manufacturers Suppliers Exporters

Manufacturers Specifications of Sodium formaldehyde bisulfite or Sodium hydroxymethanesulphonate.

Sodium Formaldehyde Bisulfite or Sodium Hydroxymethanesulfonate SDS Safety Data Sheet
MSDS Sheet, Material Safety Data Sheet

Section 1 - Chemical Product Identification

Product Name/Synonyms: Sodium Formaldehyde Bisulfite or Sodium Hydroxymethanesulfonate or Sodium Formaldehyde Bisulphite or Sodium Hydroxymethanesulphonate.
CAS #: 870-72-4
EINECS EC Number: 212-800-9
Molecular Formula: HOCH2SO3Na
Molecular Weight: 134.09

Section 2 - Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.

Labeling according GHS & Regulation (EC) No 1272/2008

GHS Label Elements NONE

Signal Word: None

Hazards not otherwise classified (HNOC) or not covered by GHS:
May cause mild eye irritation.
May causes mild skin irritation.

Precautionary statements:
P261: Avoid breathing dust/fume/gas/mist/vapors/spray.
P262: Do not get in eyes, on skin, or on clothing.
P281: Use personal protective equipment as required.
P302+P352 - IF ON SKIN: Wash with plenty of soap and water.
P303+P361+P353 - IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+313: If eye irritation persists get medical advice/attention.

Section 3 - Composition, Information on Ingredients

Chemical Name: Formaldehyde Sodium Bisulfite or Sodium Formaldehyde Bisulfite or Sodium Formaldehyde Bisulfite or Sodium Hydroxymethanesulfonate or Sodium Formaldehyde Bisulphite or Sodium Hydroxymethanesulphonate.
CAS #: 870-72-4
EINECS EC Number: 212-800-9

Section 4 - First Aid Measures

Eyes: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention if irritation occurs.
Skin: Wash with soap and water. Cover the irritated skin with an emollient. Get medical attention if irritation develops. Cold water may be used.
Ingestion: Do not induce vomiting. Get medical aid if irritation or symptoms occur.
Inhalation: Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid if cough or other symptoms appear.

Section 5 - Fire Fighting Measures

General Information: As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. Keep product and empty container away from heat and sources of ignition. Thermal decomposition can lead to release of irritating gases and vapors.
Extinguishing Media: Use water spray, dry chemical, carbon dioxide, or chemical foam.
Flash Point: 184 deg C ( 363.20 deg F)
Auto-ignition Temperature: 500 deg C ( 932.00 deg F).
Hazardous Combustion Products: Carbon monoxide (CO) Carbon dioxide (CO2) Sulfur oxides and fumes.

Section 6 - Accidental Release Measures

Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according law.
Large Spill: Use a shovel to put the material into a convenient waste disposal container. Avoid dust formation. Should not be released into the environment. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.

Section 7 - Handling and Storage

Handling: Wear personal protective equipment. Use Sodium Formaldehyde Bisulfite or Sodium Hydroxymethanesulfonate with adequate ventilation. Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.
Storage: Store in a cool, dry place. Store in a tightly closed container.

Section 8 - Exposure Controls, Personal Protection

Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits: Formaldehyde Sodium Bisulfite or Sodium Hydroxymethane Sulfonate or Sodium Formaldehyde Bisulfite is not listed by ACGIH, NIOSH, OSHA - Final PELs
Personal Protective Equipment
Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to prevent skin exposure.
Respirators: A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.

Section 9 - Physical and Chemical Properties

Physical State: Sodium Formaldehyde Bisulfite or Sodium Hydroxymethane Sulfonate is solid.
Appearance: White
Odor: Odorless.
pH: 7 - 8 (100g/L aq sol)
Freezing/Melting Point: 200C (decomposes)
Decomposition Temperature: 200C
Autoignition Temperature: 500C
Solubility: 800 g/L (20C)
Molecular Formula: CH3NaO4S
Molecular Weight: 134.08

Section 10 - Stability and Reactivity

Chemical Stability: Hygroscopic; absorbs moisture or water from the air.
Conditions to Avoid: Incompatible materials, dust generation, exposure to moist air or water.
Incompatibilities with Other Materials: Strong oxidizing agents.
Hazardous Decomposition Products: Carbon monoxide, oxides of sulfur, carbon dioxide and fumes.
Hazardous Polymerization: Has not been reported.

Section 11 - Toxicological Information

RTECS#: CAS# 870-72-4: PB2200000
LD50/LC50: CAS# 870-72-4 Oral, rat: LD50 = 3200
Carcinogenicity: CAS# 870-72-4: Not listed by ACGIH, IARC, NTP, or CA Prop 65.
Mutagenic Effects: Not mutagenic in AMES Test
Reproductive Effects: No information available.
Developmental Effects: No information available.
Teratogenicity: No information available.

Section 12 - Ecological Information

Ecotoxicity: No data available. No information available.
Environmental: No information available.
Persistence and Degradability: Soluble in water Persistence is unlikely based on information available.
Bioaccumulation/ Accumulation: No information available.
Mobility: Will likely be mobile in the environment due to its water solubility.

Section 13 - Disposal Considerations

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. US EPA guidelines for the classification determination are listed in 40 CFR Parts 261.3.
RCRA P-Series: None listed.
RCRA U-Series: None listed.

Section 14 - Transport Information

DOT & ADR/IRD: Not regulated.
IMDG : Not regulated.
IATA: Not regulated.

Section 15 - Regulatory Information

USA:
SARA Section 302 Extremely Hazardous Substances: None of the chemicals in this product have a TPQ.
Section 313: No chemicals are reportable under Section 313.
California Prop 65: California No Significant Risk Level: None of the chemicals in this product are listed.

Section 16 - Additional Information

DISCLAIMER: The information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed correct as of the date hereof. It is compiled from various sources and it is not necessarily all inclusive nor fully adequate in every circumstance. In addition, these suggestions should not be confused with nor followed in violation of applicable laws, regulations, rules or insurance requirements applicable. This MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.

Sodium formaldehyde bisulfite or Sodium hydroxymethanesulphonate Manufacturers

Aadhunik Industries
Ankleshwar Gujarat &, Mumbai, India
TEL: (OFFICE) 91-22-23774610, 23723564.

e-mail: info@aadhunikindustries.com

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Korea, Japan, Vietnam, Holand, Norway, etc.

Copyright and Usual Disclaimer is Applicable